De verkoopomgeving: alle vooroorlogse auto's te koop

Pair of newly manufactured half shafts for Delahaye and some Delage rear axles.  Standard width.The shafts was in use prior to us converting the axle to the correct racing type.  I believe they was made by Orson Equipment for Ronin Engineering.

380K axle with a differential 

A pair of original 330 mm brake back plates for wire wheeled T37 or 40/44. Requires a bit of work, but all fairly easily done.  Sensibly priced at GBP 775,- or Eur 900,- + postage. More photos available.

I am looking for a pair of front shocks, like fitted on Rover P2.

New manufactured to 4.5 litre ratio to fit 3 litre steering box, new unused condition.

Rear axle internals, stamped 9567X4Possibly Singer Le mans

trembler coil dated 23rd -8 - 07 and marked with the rover shield on the front. the coil appears to be good there is no tar around it, the points are not original but most of the other bits are original.

Pair of Riley narrow track half shafts slight marks to one thread as per pictures.    The half shafts look unused but cannot say for sure,  These are the uprated type supplied by Vintage Riley Parts with the diff end induction hardened not to be confused by the cheaper ones that do not have the ends hardened.

A pair of RAF rear hubs to fit Delage. Probably D.I.S. but may also fit D.I. or D.I.S.S.. Good condition.

 Bugatti Molsheim numbered  4 bolt diff casing and trumpets for building up with new internals