Front axle for ca. 1937 Morris Eight. In serviceable condition but brakes incomplete. (backing-plates only). Stamped number 73668, also 192. 530mm axle pads centres 669mm spring eye centres 973mm king pin approx. measured at top Location: AS 5
Set of new-old-stock king-pins and bushes for a Morris-Ten. Including two extra brass bushes, 1 ¼ inch long. These will not fit on Morris-Eight. pin diameter: 19mm / 99.2mm long brash bush OD: 22.85mm / 32mm long steel bush (brass lined): 22.85mm / 25mm long Location: UT HG 6B
Sidelight for the 1920's Buicks. In good condition, no dents or cracks but would benefit from a polish and a fresh coat of paint. Diameter 7cms. Complete with original mounting screw and washer. Price includes worldwide postage. Int. Ref: OS 51F
Front axle for the 6 cylinder Stutz in good condition. Made by Timken. Measurements: Spring pad to top of king ping pad: 160mm King pins: 1285mm centre to centre (measured at top) Leaf springs: 660mm centre to centre Measurements between the bolts which is 57mm or 2.24" so we guess they are made for 2.25" springs Int ref: OWS 21kg
Merceedes Benz Front Axle with some accessories.Breaking Mechanism in working condition.Front Track Width = 1425cm.For other measurement; please refer to the attached photos.Over all very good conditionHeavy part!
1926 (1925 -27) Buick crown wheel & pinon gears.Was spares from our 1926 Standard '6' Has been in long term storage - appears unused, with no visible wear.10 : 49 Ratio.I believe also suitable for Buick Master 6 of same date.Happy to ship worldwide at cost (weight) Paypal, bank transfer accepted.