ENV manual gearbox casing for Invicta. Original casting with "Invicta" on side. Crosstube bosses both undamaged. The bellhousing has cracked and been welded - but will need redoing before this can be used. Can either be repaired or new bellhousing section used to replace existing - which I have done. This is a crisp origin..
I´m looking for a cone clutch only or with a gearbox for a vinot engine from circa 1906-09.Any cone clutch is interesting. I´m also looking for chain drive chassi and/or parts for it.
For sale a V-belt pre-war motorcycle or car, in original. Shipping worldwide at cost and PayPal accepted.4/8 inches or 2/4 inches; 12mm-13mm; 2.5 meters length = 139 euros; mostly for 74ccm to 118ccm or mostly for auxiliary bicycles; Alternators; Water pumps5/8 inches; 15mm-16mm; 2.5 meters length = 149 euros; mostly for around 200..
For sale I have a kit of parts all pre 1930 to make up (what was going to be a Gordon England Cup). The chassis is 1926 as are the axles etc. The engine is a complete 1928 coil unit and the gearbox is a an early three speed with a lovely curved gear lever. There are the following parts included: 1926 chassis with some new roach man..
For sale a V-belt pre-war motorcycle or car, in original. Shipping worldwide at cost and PayPal accepted.4/8 inches or 2/4 inches; 12mm-13mm; 2.5 meters length = 139 euros; mostly for 74ccm to 118ccm or mostly for auxiliary bicycles; Alternators; Water pumps5/8 inches; 15mm-16mm; 2.5 meters length = 149 euros; mostly for around 200..
For sale a V-belt pre-war motorcycle or car, in original. Shipping worldwide at cost and PayPal accepted.4/8 inches or 2/4 inches; 12mm-13mm; 2.5 meters length = 139 euros; mostly for 74ccm to 118ccm or mostly for auxiliary bicycles; Alternators; Water pumps5/8 inches; 15mm-16mm; 2.5 meters length = 149 euros; mostly for around 200..