Riley 12/4 block as per pictures complete with centre and rear bearing carriers. Previous repair as per pictures but is sound.Block has been pressure tested and is ok. The block has had liners fitted in the past and they are currently at the standard size of 69mm.
Brand new set of shock absorber springs and discs. I am not sure if this is everything required, but what you can see in the pics is what you will get. 4 brass shims, 4 discs, 2 spring, 2 nylon bearings, 2 washers, 1 nut. Postage at cost, or collect from Kings Lynn, UK
Here is an engine for a Standard 9 Teignmouth including the cylinder head. What you can see in the pictures is what you get. May consider a close offer.Can possibly arrange delivery at cost.
A rare pair of original Lucas LB130 headlamps as fitted to circa 1933 Austin 7. They are complete apart from the screw that holds the dipping reflector mechanism to the shell. They are in sound unrestored condition. There are a couple of hairline cracks around the base mounting plate but these would be easy to restore. I accept PayPal and will pos..
FULLY OVERHAULED (A-LIGNED /HEAT TREATED / GRINDED) BY CATCAMS-WOMMELGEM. EVER SINCE THE CAMSHAFT HAS BEEN ON THE SHELF IN MY GARAGE. THIS SHAFT POWERS OILPUMP AND REV COUNTER. NEVER USED. Have a look at : www.catcams.com
Rolls-Royce Phantom 2 Cylinder Blocks.These have been linered in the past. The Blocks have been pressure tested to 25psi, and there is little corrosion in the water ways, which are quite clean. The pistons number only 5, but are not fit for reuse, but would make interesting paperweights if polished up.Extremely rare parts, keep your engine original..